Re: H & E Staining Method
<< Previous Message | Next Message >>
From: | "Tony Henwood" <henwood@mail.one.net.au> |
To: | "Tony Henwood" <henwood@mail.one.net.au> |
Reply-To: | |
Date: | Sun, 12 Sep 1999 00:26:47 +0000 |
Content-Type: | text/plain; charset=US-ASCII |
Dear Stan,
Sorry, Sodium iodite should read sodium iodate.
> Try the following:
>
> GARVEY'S MODIFIED MAYER'S HAEMATOXYLIN
>
> NOTES:
> This solution is a progressive haematoxylin that uses 10% less alum. Chloral hydrate, because of its toxicity, has been replaced with ethanol, a more effective penetrator and bacteriostat. Mercury ox>
> SOLUTION:
> Dissolve 45g ammonium or potassium alum in 900ml distilled water with the aid of heat.
> Dissolve 2.5g Haematoxylin in 100ml absolute ethanol.
> Combine above solutions and add 0.2g Sodium Iodite and 1g citric acid.
> Mix well. The solution is stable for several months.
> STAINING:
> 1. Dewax and hydrate sections.
> 2. Stain in modified Mayer's Haematoxylin 40secs.
> 3. Wash in warm water 5min.
> 4. If required, counterstain in eosin solution.
> 5. Dehydrate, clear and mount.
>
> REFERENCE:
> Garvie, W., (1991) J. Histotechn 14(3):164-165.
Tony Henwood
Senior Scientist
Anatomical Pathology
Royal Prince Alfred Hospital
Sydney, AUSTRALIA
http://www2.one.net.au/~henwood
http://www.pathsearch.com/homepages/TonyHenwood/default.html
<< Previous Message | Next Message >>