Re: [Histonet] neon bulb array help
Hi, and another "vendor response" if you'll forgive me:
I don't believe that specs matter much for the neon bulbs in this
application, the reason being that the microwaves are directly exciting
the gas contained in the bulb; since it's not "electrical" per se, specs
like voltage or wattage shouldn't matter. Do a google or yahoo search
and you'll find lots of suppliers; go for the cheapest, and you DON'T
need the type with a built-in resistor; the ones we used in the past
were about 1/4" long and we clipped off the leads as short as possible
(our design encased the bulbs entirely, so we didn't need the leads to
hold the bulbs in place).
Although we don't sell them, you can buy a pre-made neon bulb array from
other sources, including Electron Microscopy Sciences (www.emsdiasum.com).
It's apparent from your query that you're trying to quantify and
document your microwave's performance, and we applaud this effort.
However, you should be aware of limitations of what the array shows. At
EBS we've found neon bulb arrays of limited practical usefulness for the
following reason: any microwave's field changes as soon as anything is
placed into the chamber. That said, the very fact that you're placing
the bulb array into the chamber alters the microwave energy field.
(Isn't that the "Westinghouse Effect:" the act of observation changes
what you're trying to observe?) It is possible to re-test as you place
different equipment into the microwave, for example, a Coplin jar, a
100mL container, etc., but the array also only shows what's reaching the
chamber floor, not what's being absorbed by the equipment. It should be
stressed that the array can reveal a major hotspot or cool spot, or show
that your mode stirrer may not be working, and this has value since
these are major defects that should be addressed immediately.
Hope this helps!
Microwave Product Manager
Energy Beam Sciences, Inc.
Tel: 800.992.9037 x 341
Angela Bitting wrote:
> Hi Histonetters!
> Anyone out there trying to make their Neon Bulb Array so that they can
> test theor microwaves energy pattern is going to find that Radio Shack
> doesn't carry that size bulb anymore and hasn't replaced it with another
> Sooo, because the Microwave Toolbook doesn't really give a description
> of that bulb, just the Radio Shack part number, I'm at a loss.
> Does anyone know what the specs are on that neon bulb or know an
> identical part number. I'm sure Lowes or Home Depot must sell them, but
> I don't even know what to ask them for.
> Angela Bitting, HT(ASCP)
> Technical Specialist, Histology
> Geisinger Medical Center
> 100 N Academy Ave. MC 23-00
> Danville, PA 17822
> phone 570-214-9634
> fax 570-271-5916
> IMPORTANT WARNING: The information in this message (and the documents attached to it, if any) is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken, or omitted to be taken, in reliance on it is prohibited and may be unlawful. If you have received this message in error, please delete all electronic copies of this message (and the documents attached to it, if any), destroy any hard copies you may have created and notify me immediately by replying to this email. Thank you.
> Histonet mailing list
Histonet mailing list
<< Previous Message | Next Message >>