Hi Dorothy,
Depending on the brand, some processors will heat the preheat the
retort. Then pump it back into the last paraffin. The VIP does this,
which is what I have. I clean my molds this way, once a week maximum,
and have not had problems. I had an old MVP prior to the VIP and it did
not pump back any molten paraffin.
Fred
>>> "Webb, Dorothy L" 11/16/2007
1:34 PM >>>
At the previous facility I worked at, we daily cleaned our mold in the
cleaning cycle until we had a problem with the processor and was told
by
the field service engineer and then the company that doing this was
hard
on the machine with all of the excess paraffin in the tubing. I do
not
know if that has any merit, but, we quit doing that and never had that
type of problem again. Just a thought!!
Dorothy Webb, HT (ASCP)
Histology Technical Supervisor
Regions Hospital, Pathology Department
640 Jackson Street, Saint Paul, MN 55101-2595
Phone: 651-254-2962
Fax: 651-254-2741
Regions Hospital is part of the HealthPartners family of care
________________________________________
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom they are
addressed. If you are not the intended recipient or the individual
responsible for delivering the e-mail to the intended recipient, please
be advised that you have received this e-mail in error and that any use,
dissemination, forwarding, printing, or copying of this e-mail is
strictly prohibited.
If you have received this e-mail in error, please immediately notify
the HealthPartners Support Center by telephone at (952) 967-6600. You
will be reimbursed for reasonable costs incurred in notifying us.
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
|