RE: IHC on frozen cryosectioned rat kidney

From:"Stone, Jessica" <>

Thank you for your time and input. I'll definitely try out some of your
ideas. Also, I believe in the original e-mail is where I indicated tissue
size, I cut out a kidney midsection ~5-8mm thick.
Thanks again

-----Original Message-----
From: Gayle Callis []
Sent: Tuesday, May 22, 2001 10:41 AM
To: Stone, Jessica;
Subject: RE: IHC on frozen cryosectioned rat kidney

Trying to snap freeze a whole rat kidney, if that is the case, may be too
much tissue for a good snap freeze.  Have you tried a smaller sample,
bisected kidney or portion of a kidney?  I am assuming the kidney is whole
but I may be incorrect, you did not say??  

We snap freeze all murine and rat tissues embedded in OCT in a Tissue Tek
cryomold with little plastic wing edges removed for a better heat sink, and
immerse this into dry ice cooled isopentane until bubbling stops.  The dry
ice and isopentane are mixed together giving a slurry, and tissue would be
cut at -20C.  I do whole mouse kidney, smaller than rat, this way and have
no freezing artifact, kidney looks normal.  

After sectioning, sections are air dried 30 min before acetone or air dried
overnight before acetone alcohol mixture, you would have to optimize a
fixative protocol for your antibody, some are fussier than others.  NBF or
paraformaldehyde fixation can be done more rapidly, but for a shorter
fixation time to prevent overcrosslinking.  I have fixed as little as 2 min
in 2 -4% paraformaldehyde without losing sections, but I did not do any
retrieval either.  Acetone 75%/100% ethanol 25% 5 min RT then into PBS
gives better morphology than acetone 10 min at 4C.  It must be pointed out
I am not using your antibody for my work.  

I have no idea if this helps, just tossing it out.

Gayle Callis
Histopathology Supervisor
Veterinary Molecular Biology
Montana State University - Bozeman
Bozeman MT 59717-3610

406 994-6367
404 994-4303 (FAX)

<< Previous Message | Next Message >>