RE: [Histonet] Paraplast Plus/Lost wax

From:"Ford Royer"

My first thought was the same as Cheryl's that there may be unwanted residue
(from the polymers & plastics) left over from the "burn out".  Also, the wax
used in the "Lost Wax" method is normally a combination of pure paraffin and
bees wax in a ratio of about 60/40.  But as Cheryl suggests - try it out on
a practice piece and see what happens.  If it works with no residue, I would
then recommend that the instructor procure some bees wax (available at all
craft stores) and add that to their Paraplast for even better results.  They
may find that Paraplast alone is too brittle to handle when harden.  The
bees wax makes the mixture more malleable for easier finishing touch-ups
before final molding.

If the Paraplast is found unsuitable due to the aforementioned concerns,
then there are other things that the school could use it for.  I donated
some old embedding media to my kid's school to make candles and fire
starters that they sold at a school-wide crafts fair as a fund raiser.
Contact me "Off List" for more detail if interested.

~ Ford

Ford M. Royer, MT(ASCP)
Minnesota Medical, Inc.
7177 Madison Ave. W.
Golden Valley, MN 55427-3601
CELL:  612-839-1046
Phone:  763-542-8725
Fax:  763-546-4830

-----Original Message-----
[] On Behalf Of Cheryl Kerry
Sent: Wednesday, January 31, 2007 5:12 PM
Subject: RE: [Histonet] Paraplast Plus/Lost wax

Lost wax methods require the wax 'burn out' completely when heated prior to
casting. With the plastics in the wax--there might be a residue.

Only one way to find out--try it!

Full Staff Inc

Histonet mailing list

Histonet mailing list

<< Previous Message | Next Message >>