From:"Monfils, Paul"

We buy xylene in 1-gallon plastic bottles, and there is no problem putting
them in the trash.  However, just a couple of suggestions - Do you actually
have to remove the labels, or will they accept painting them over? Or
sanding them with coarse sandpaper so they are illegible?  Probably the
easiest way to make holes in such a container would be a hole saw set in an
electric drill.  I would do this after the containers are well rinsed.
Electrical motors shouldn't be used in close proximity to flammable solvents
for obvious reasons.

> ----------
> From: on behalf of
> Fairman Mara
> Sent: 	Friday, January 27, 2006 8:51 AM
> To:
> I have a question for anyone ordering xylene or toluene in the 5 gallon
> heavy white plastic containers.  The cost for disposal companies to take
> away is high.  The landfills won't take unless they are: triple rinsed,
> all
> warning labels removed and large holes in them (so they can't be re-used).
> It is not an easy task to remove those labels, not to mention finding a
> way
> to put holes in that heavy plastic.  I would appreciate hearing how other
> labs are disposing of these.
> Thanks,
> Mara
> Our Mission:
> Healing all people with compassion, faith and excellence
> Confidentiality Notice:  
> This e-mail message, including any attachments, is for 
> the sole use of the intended recipients and may contain 
> confidential and/or legally privileged information. 
> If you are not the intended recipient, please contact 
> the sender by reply e-mail and destroy all copies of the 
> original message. Any unauthorized review, use, 
> disclosure, or distribution is prohibited. 
> Thank you.
> _______________________________________________
> Histonet mailing list

Histonet mailing list

<< Previous Message | Next Message >>