Re: Hood Help

From:

Bryan Llewellyn

I had a similar problem over our coverslipping area some years ago. The easiest resolution for us was to get a sheet matal shop to make us one from thin steel, like that used for heating ducts. We hooked into an existing extraction system, but it should be easy enough to fit a fan on and discharge it somewhere safe.

bryan Llewellyn

----- Original Message -----

From: Nita Searcy

To: histonet@pathology.swmed.edu

Sent: Wednesday, February 05, 2003 11:52 AM

Subject: Hood Help

anyone out in histo land know of a hood that will fit over existing grossing areas that have a board that "flows" to the sink? Have looked @ all the major players- Shandon, Allegiance, etc. without much help. The existing area was built many moons ago - we are "planning" a new area- but looks like 3+ years away. What something to suffice until renovations. Counter top is only 24" wide and has a cabinet overhead that is in t he way-----any ideas?

Thanks

Nita Searcy, HT/HTL (ASCP)
Scott and White Hospital
Temple, Texas
Division Manager, Anatomic Pathology
254-724-2438

<< Previous Message | Next Message >>