We do the same as you describe.
Mike

-----Original Message-----
From: histonet-bounces@lists.utsouthwestern.edu
[mailto:histonet-bounces@lists.utsouthwestern.edu] On Behalf Of Fischer,
R. B
Sent: Tuesday, May 06, 2008 11:22 AM
To: histonet@lists.utsouthwestern.edu
Cc: Delcambre, Linda V
Subject: [Histonet] RINSING IN TAP WATER AFTER DECAL


We have been using "RDO" and "CAL-X" decal solutions for some time now.
After the specified times in the decal solutions, the specimens are
rinsed in running tap water for about 10 minutes before being placed
back in 10%NBF for routine processing. We were rinsing to get rid of the
nitric acid. My questions are (1) Is this rinse step necessary? If it
is, (2) How long is an adequate time for rinsing?(3) How are other labs
handling the specimen post decal, and before processing?
 
 
 
R.Brian Fischer
Histology Lead Tech
Community Hospital of the Monterey Peninsula
PO Box HH Monterey Ca. 93942
831-625-4791
Fax: 831-6583683
 
Confidentiality Notice:
This is a transmission from Community Hospital of the Monterey
Peninsula.  This message and any attached documents may be confidential
and contain information protected by state and federal medical privacy
statutes.  They are intended only for the use of the addressee.  If you
are not the intended recipient, any disclosure, copying, or distribution
of this information is strictly prohibited.  If you received this
transmission in error, please accept our apologies and notify the
sender.

Thank you.


_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet