RE: [Histonet] tissue slicer
Thanks to everyone for your advice and suggestions. It seems I might have
to re-think the thickness of the slices required - in retrospect, I was
probably aiming too low anyway. Basically, the reason we want to cut them
quickly is in order to culture the slices later, so I'm not sure a
vibratome or cryostat would be appropriate as I think the tissue would
have to be embedded/ frozen first. Overall the 'egg-slicer' or matrix type
of device seem like they may be the best option, but I may try to make my
own, as described by Geoff, to cut costs a bit.
Bad vibes, man.
> But, Geoff, your device would work, but as you note, not for less
> than 1000 micron slices, definitely not 30 - 300 micron, and there'd
> be more tissue damage from compression. A vibratome is pretty much
> the only choice, there is no "all slices at once" instrument that
> I've seen.
>>Always wondered what a vibratome was.
>>I've got a wifatome.
>>Dr Terry L Marshall, B.A.(Law), M.B.,Ch.B.,F.R.C.Path
>> Consultant Pathologist
>> Rotherham General Hospital
>> South Yorkshire
>>From: Geoff McAuliffe [mailto:firstname.lastname@example.org]
>>Sent: 19 April 2004 19:08
>>Subject: Re: [Histonet] tissue slicer
>> You could buy a Vibratome, a device with a vibrating blade that will
>>cut fixed or unfixed tissue at a thickness you select. I think there are
>>several models and vendors.
>> Or, you could make an inexpensive device for little more than pocket
>>change. Buy some high-quality double-edge razor blades and some material
>>to use for spacing the blades. For 1 mm or more use square aluminum rod,
>>for 0.5 mm or less use "shim stock". A well-stocked hardware store or
>>maching shop will have these items. Use "super-glue" to glue up a
>>"blade-spacer-blade-spacer-blade ..." tool with as many blades as your
>>project demands. One 'application' of the tool to the sample will give
>>you uniform and reproducable slices. Be sure to cut off or mask the
>>edge of the blade not in use so you won't cut yourself.
>>Katy Whalley wrote:
>>>We are looking for a device which can be used to cut tissue quickly into
>>>slices of an even thickness. We're not sure yet exactly how thick these
>>>will be but something in the range 30-300 microns is likely. My
>>>has in mind something in which several blades are attached to a holder
>>>that keeps them the correct distance apart, so that all the slices are
>>>at once. Has anyone ever used/ seen this kind of thing, or anything else
>>>which would do the job?
> Philip Oshel
> Supervisor, BBPIC microscopy facility
> Department of Animal Sciences
> University of Wisconsin
> 1675 Observatory Drive
> Madison, WI 53706 - 1284
> voice: (608) 263-4162
> fax: (608) 262-5157 (dept. fax)
> Histonet mailing list
Histonet mailing list
<< Previous Message | Next Message >>